View UPG2163T5N-E2_1332704.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

PRELIMINARY PRODUCT INFORMATION
GaAs INTEGRATED CIRCUIT
uPG2163T5N
GaAs MMIC SPDT SWITCH FOR 2.4 GHz AND 5 GHz DUALBAND WIRELESS LAN
DESCRIPTION
The uPG2163T5N is a GaAs MMIC SPDT switch for 2.4 GHz and 5 GHz dualband wireless LAN. Low insertion loss and dual band operations suit to dualband wireless LAN system.
FEATURES
* Operating frequency * Low insertion loss * Handling power * High isolation * Input/output return loss : f = 2.4 to 2.5 GHz and 4.9 to 6.0 GHz : LINS = 0.4 dB TYP. @ f = 2.4 to 2.5 GHz : LINS = 0.5 dB TYP. @ f = 4.9 to 6.0 GHz : Pin (1 dB) = +31 dBm TYP. @ f = 2.5 GHz +29 dBm TYP. @ f = 6.0 GHz : ISL = 35 dB TYP. @ f = 2.4 to 2.5 GHz : ISL = 30 dB TYP. @ f = 4.9 to 6.0 GHz : RLin/RLout = 15 dB TYP. @ f = 2.4 to 2.5 GHz : RLin/RLout = 15 dB TYP. @ f = 4.9 to 6.0 GHz * 6-pin plastic TSON package (1.5 x 1.5 x 0.4 mm)
APPLICATION
* 2.4 GHz and 5 GHz dualband wireless LAN : IEEE802.11a+b/g
ORDERING INFORMATION
Part Number UPG2163T5N-E2 Package 6pinTSON Marking TBD Supplying Form * Embossed tape 8 mm wide * Pin 1.6 face to tape perforation side * Qty TBD kpcs/reel
Remark To order evaluation samples, contact your nearby sales office. Part number for sample order: uPG2163T5N
Caution Observe precautions when handling because these devices are sensitive to electrostatic discharge.
The information in this document is subject to change without notice. Before using this document, please confirm that this is the latest version.
Not all devices/types available in every country. Please check with local NEC Compound Semiconductor Devices representative for availability and additional information.
Document No. 1st version Date Published May 2005 CP(K) Printed in Japan
(c) NEC Compound Semiconductor Devices 2005
uPG2163T5N
PIN CONNECTIONS AND INTERNAL BLOCK DIAGRAM
Top View Bottom View Pin No. 1 2 3 4 5 6 EXPOSED PAD Pin Name NC (GND) Vcont2 RX TX Vcont1 ANT GND
Remark NC is functionally non-connection pin but actually grounding is recommended.
TRUTH TABLE
Vcont1 High Low Vcont2 Low High ANT-RX ON OFF ANT-TX OFF ON
ABSOLUTE MAXIMUM RATINGS (TA = +25C, unless otherwise specified)
Parameter Switch Control Voltage Input Power Operating Ambient Temperature Storage Temperature Symbol Vcont Pin TA Tstg Ratings -6.0 to +6.0 TBD -45 to +85 -55 to +150
Note 1
Unit V dBm C C
Notes 1. | Vcont1 - Vcont2 | 6.0 V
2
PRELIMINARY PRODUCT INFORMATION
uPG2163T5N
RECOMMENDED OPERATING RANGE (TA = +25C)
Parameter Operating Frequency 1 Operating Frequency 2 Switch Control Voltage (H) Switch Control Voltage (L) Symbol f1 f2 Vcont (H) Vcont (L) MIN. 2.4 4.9 2.7 -0.2 TYP. - - 3.0 0 MAX. 2.5 6.0 5.0 0.2 Unit GHz GHz V V
ELECTRICAL CHARACTERISTICS (TA = +25C, Vcont = 3.0 V/0 V, ZO = 50 , DC blocking capacitors value: 4 pF, Each port, unless otherwise specified)
Parameter Insertion Loss Symbol Lins Test Conditions f = 2.4 to 2.5 GHz f = 4.9 to 6.0 GHz Isolation ISL f = 2.4 to 2.5 GHz f = 4.9 to 6.0 GHz Input Return Loss RLin f = 2.4 to 2.5 GHz f = 4.9 to 6.0 GHz Output Return Loss RLout f = 2.4 to 2.5 GHz f = 4.9 to 6.0 GHz 1 dB Gain Compression Input Power Switch Control Speed Control Current tSW Icont RF Non Pin (1 dB) f = 2.5 GHz f = 6.0 GHz - - - - - MIN. - - TBD TBD - - TYP. 0.4 0.5 35 30 15 15 15 15 31 29 50 0.7 MAX. TBD TBD - - - - - - - - - 1.5 Unit dB dB dB dB dB dB dB dB dBm dBm ns A
PRELIMINARY PRODUCT INFORMATION
3
uPG2163T5N
EVALUATION CIRCUIT
4
F
1000
F
1000
F
4
F
4
F
The application circuits and their parameters are for reference only and are not intended for use in actual design-ins.
4
PRELIMINARY PRODUCT INFORMATION
uPG2163T5N
PACKAGE DIMENSIONS 6-PIN PLASTIC TSON (UNIT: mm)
Bottom View
0.2
Preliminary
Side View
0.7
PRELIMINARY PRODUCT INFORMATION
5
uPG2163T5N
* The information in this document is current as of March, 2004. The information is subject to change without notice. For actual design-in, refer to the latest publications of NEC's data sheets or data books, etc., for the most up-to-date specifications of NEC semiconductor products. Not all products and/or types are available in every country. Please check with an NEC sales representative for availability and additional information. * No part of this document may be copied or reproduced in any form or by any means without prior written consent of NEC. NEC assumes no responsibility for any errors that may appear in this document. * NEC does not assume any liability for infringement of patents, copyrights or other intellectual property rights of third parties by or arising from the use of NEC semiconductor products listed in this document or any other liability arising from the use of such products. No license, express, implied or otherwise, is granted under any patents, copyrights or other intellectual property rights of NEC or others. * Descriptions of circuits, software and other related information in this document are provided for illustrative purposes in semiconductor product operation and application examples. The incorporation of these circuits, software and information in the design of customer's equipment shall be done under the full responsibility of customer. NEC assumes no responsibility for any losses incurred by customers or third parties arising from the use of these circuits, software and information. * While NEC endeavours to enhance the quality, reliability and safety of NEC semiconductor products, customers agree and acknowledge that the possibility of defects thereof cannot be eliminated entirely. To minimize risks of damage to property or injury (including death) to persons arising from defects in NEC semiconductor products, customers must incorporate sufficient safety measures in their design, such as redundancy, fire-containment, and anti-failure features. * NEC semiconductor products are classified into the following three quality grades: "Standard", "Special" and "Specific". The "Specific" quality grade applies only to semiconductor products developed based on a customer-designated "quality assurance program" for a specific application. The recommended applications of a semiconductor product depend on its quality grade, as indicated below. Customers must check the quality grade of each semiconductor product before using it in a particular application. "Standard": Computers, office equipment, communications equipment, test and measurement equipment, audio and visual equipment, home electronic appliances, machine tools, personal electronic equipment and industrial robots "Special": Transportation equipment (automobiles, trains, ships, etc.), traffic control systems, anti-disaster systems, anti-crime systems, safety equipment and medical equipment (not specifically designed for life support) "Specific": Aircraft, aerospace equipment, submersible repeaters, nuclear reactor control systems, life support systems and medical equipment for life support, etc. The quality grade of NEC semiconductor products is "Standard" unless otherwise expressly specified in NEC's data sheets or data books, etc. If customers wish to use NEC semiconductor products in applications not intended by NEC, they must contact an NEC sales representative in advance to determine NEC's willingness to support a given application. (Note) (1) "NEC" as used in this statement means NEC Corporation, NEC Compound Semiconductor Devices, Ltd. and also includes its majority-owned subsidiaries. (2) "NEC semiconductor products" means any semiconductor product developed or manufactured by or for NEC (as defined above).
M8E 00. 4 - 0110
6
PRELIMINARY PRODUCT INFORMATION
uPG2163T5N
This product uses gallium arsenide (GaAs). GaAs vapor and powder are hazardous to human health if inhaled or ingested, so please observe the following points. * Follow related laws and ordinances when disposing of the product. If there are no applicable laws and/or ordinances, dispose of the product as recommended below. 1. Commission a disposal company able to (with a license to) collect, transport and dispose of materials that contain arsenic and other such industrial waste materials. 2. Exclude the product from general industrial waste and household garbage, and ensure that the product is controlled (as industrial waste subject to special control) up until final disposal. * Do not burn, destroy, cut, crush, or chemically dissolve the product. * Do not lick the product or in any way allow it to enter the mouth.
Caution
GaAs Products
For further information, please contact NEC Compound Semiconductor Devices, Ltd. http://www.ncsd.necel.com/ E-mail: salesinfo@ml.ncsd.necel.com (sales and general) techinfo@ml.ncsd.necel.com (technical) 5th Sales Group, Sales Division TEL: +81-44-435-1588 FAX: +81-44-435-1579 NEC Compound Semiconductor Devices Hong Kong Limited E-mail: ncsd-hk@elhk.nec.com.hk (sales, technical and general) FAX: +852-3107-7309 TEL: +852-3107-7303 Hong Kong Head Office TEL: +886-2-8712-0478 FAX: +886-2-2545-3859 Taipei Branch Office FAX: +82-2-558-5209 TEL: +82-2-558-2120 Korea Branch Office NEC Electronics (Europe) GmbH http://www.ee.nec.de/ TEL: +49-211-6503-0 FAX: +49-211-6503-1327 California Eastern Laboratories, Inc. http://www.cel.com/ TEL: +1-408-988-3500 FAX: +1-408-988-0279
0401

▲Up To Search▲

Price & Availability of UPG2163T5N-E2

	To Download UPG2163T5N-E2 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .